en
WF130L-ZW tandem trailer
Swap-body system with telescopic chassis
Swap-body chassis for accepting swap-body platforms
Extendable drawbar
manually by approx. 3 m
Dual tires
resulting in lower loading height
Container locking
for securing when attaching the swap-body platform
Key facts
Convincing advantages.
- Swap-body system with telescopic chassis (extendable by 2 – 3 m)
- Maximum load volumes, extreme payload of up to 14 t
- Air suspension axle unit for convenient raising and lowering
- 2x1 load securing rings in outer frame
- EPD coating (sand blasted + cathodic immersion priming + coating in RAL colors)
Efficient building planning, maximum transport volumes – the tandem trailer in XXL format.
The WF series is a telescopic tandem trailer for accepting swap-body platforms. Thanks to its low design, an extremely low loading height of 86 cm with attached platform is achieved. In combination with our XXL swap-body platforms, impressive load heights of over 3 m can be moved in the low-bed – the transport of large volume, heavy timber house construction elements is also possible.
Our WF-L series was developed for the demands of our carpentry and timber house construction customers. An integrated tandem axle makes reversing and driving on winding and restricted building areas easier. The air suspension unit installed as standard simplifies changing of loaded and empty swap-body platforms. Carpenters and timber house builders can extend the swap-body system by hand by 2 m depending on the load length.
Gallery
Technical data
With a permitted gross weight of 21 t and a maximum load surface of over 29 m², the WF series is one of the XXL solutions in our range.
1,000 kg
Fifth wheel load
205 / 65 R 17.5
Tires
approx. 810 mm (loaded)
Load height
approx. 10,000 kg
Payload standard
13,000 kg
Gross weight
Compatible swap-body frames
XP130ZW – 6 m
Robust and loadable without restrictions – the swap-body platform for the WF130L-ZW tandem trailer.
Accessories
Container locking
for securing when attaching the swap-body platform
Traverse member for construction timber
- insertable and lockable
- hot-dip galvanized
- X stake pockets and lashing possibilities centrally at the sides
Floor of low-bed frame
- in aluminum corrugated sheet
- X stake pockets centrally along the length
Safety package
- Oversized warning signs front and rear
- Side LED lighting
- LED all round lighting that can be plugged in at the rear
Adapter set with 2 towing rings
- for different coupling heights
- Change without tools in only 5 min.
Quiry
You want more information, a call back or a non-binding offer? Write to us and we will deal with your request.
All tandem trailers at once
Experience the complete functionality and flexibility of our Auwärter tandem trailers – a high-quality range of payload-optimized low loaders and high loaders that are built exactly for the demands in timber construction.